Thomas Dudley Home Page
about us
bathroom products
iron castings
water saving
downloads
install
quality
marketing
news
contact us
group
spares
 

Product Description

 
The Dudley Illusion 'V' is a strong in-wall support for wall-hung WC pans. It comes with a pre-fitted, factory assembled revolutionary Dudley Vantage concealed cistern.

Illusion 'V'



Uses

Unique wall and floor fixing brackets enable the frame to be fixed against flat walls (inset 2), into corners (inset 3) and into fitted bathroom furniture. It is also ideal for use behind partitions and in other ducted applications. The frame passes the 400Kg load test based on EN 997 and can be installed with confidence.

Once the frame has been bolted to the floor and rear wall, the whole system can be left in position whilst the partition is constructed. The Vantage cistern is protected by the frame’s wall-fixing brackets and top support strut. With the partition in place, the WC pan can be quickly secured to the pan fixing bolts and connected to the flushbend and soil pipe.

   

 


Special Features

 

The wall fixing brackets (right top) can be fixed at any angle through 180 degrees. This enables the ‘V’ to be specified for a wide range of applications. These brackets are also reversible and allow the frame to be fitted between 150 and 350 mm from the rear wall. The floor fixing brackets (right bottom) can be rotated through 360 degrees and are simply adjusted to give pan height fixing flexibility.

The Dudley Vantage is the market-leading concealed cistern. It is supplied fully factory assembled with a host of time saving features including an injection moulded, push-fit flushbend and Speedfit® water inlet elbow.

The Vantage provides single (6 litre) and dual (6 litre full, 4 litre reduced) flushing that complies with the Regulator's Specification. It is operated by a range of pneumatic push buttons that add the perfect finishing touch to traditional bathrooms, washrooms and modern wet rooms.

Strong brackets (below left) hold the cistern securely in place. Floor and pan fixing bolts are supplied along with a 100mm diameter soil pipe clamp.

   

 


Technical Information

 
  • Strong steel tubular section construction
  • Flushbend and pan connector clamps
  • Blue painted finish with galvanised wall and floor brackets
  • Passes 400Kg load test based on EN 997

Download Brochure

We reserve the right to alter or modify the specification without notice.

  • OHSAS 18001 (Health     & Safety Management     Systems)
  • BS EN ISO 9001     (Quality Management     Systems)
  • The high quality, and highly innovative products manufactured by Thomas Dudley Ltd are available through most plumbers' and builders' merchants. For pricing details, please contact your local branch.